News & Press: General Fire Service

Firefighter Technical Review Committee Highlights - December 2020 Meeting

Wednesday, December 9, 2020   (1 Comments)
Posted by: Victoria Pettis
  1. There were four inspections reviewed this month. Only one inspection resulted in findings.  Some of these are general findings previously listed in the Dirty Dozen pamphlet.   Use these reports as resources for your fire department to avoid L&I findings and/or fines for noncompliance. Review the “Dirty Dozen” pamphlet on the WFCA web site for a list of most common findings issued by L&I during fire service inspections.   Encourage employees to use this pamphlet as a handy reference during inspection/walk around of your facilities and equipment.
  1. If using areas above office spaces for storage, ensure load limits are posted and limit floor loads to prevent ceiling collapse.
  2. Free access to eye wash stations and fire extinguishers must be maintained. Storing material in front of these items prevents prompt access during an emergency.
  3. If overhead gantry cranes are used, ensure there are no objects blocking its path during operation.
  4. Ensure annual and daily inspections on forklifts or scissor lifts are performed and documented. Ensure operators wear seat belts when operating this equipment.
  5. Ensure flammable and combustible materials are properly stored.
  6. If secondary hazardous material containers are used, they must be appropriate for the hazardous material and labeled accordingly.
  7. Ensure appropriate fall protection is provided when required.

 

  1. All departments should be aware that L&I does verify implementation of the Governor’s COVID 19 restrictions during inspections.
  2.  FYI – All state agencies have been notified by the Governor’s office to continue teleworking until July 1, 2021.
  3. There will be a new training paper/pamphlet issued by L&I soon addressing high energy lasers and hazards associated with 5G transmission lines.

Comments...

Emily Carter says...
Posted 4 hours ago
A quick reminder that most issues found were basic safety compliance points—keep emergency equipment accessible, follow storage/load limits, maintain lift inspections, and ensure proper hazardous material labeling. Simple consistency in these areas helps avoid fines and keeps crews safe.